WELCOME TO BLADE HELICOPTERS!
22.2V 5000mAh 6S 30C LiPo Battery: EC5
- Capable of maximum continuous discharge rates up to 30C
- Equipped with balancing leads and a connector that are compatible with most balancers and balancing chargers
- Equipped with an E-flite EC5 connector on main power leads
- Ideal for use in 60-size airplanes using Power 60 outrunner, large (80mm or larger) ducted fans for higher power setups, or 600-size helis
E-flite High-Power Series Lithium Polymer Batteries offer an excellent blend of weight, power and performance. Available in a wide variety of capacities and voltages, there’s a battery perfect for almost any application, from indoor slow flyer to large-scale sport and aerobatic airplane models as well as micro to mid-sized helicopter models.
Please Note: In order to comply with shipping regulations and safety, this 6S 5000mAh battery is equipped with external series wire leads with gold bullet connectors that are shipped disconnected so the pack is considered as two 11.1V packs connected in series. You are required to connect the series wire leads before first use by connecting the two bullet connectors in order for this pack to properly operate as a 22.2V pack.
Before shipping this pack for any reason in the future, you will need to disconnect the series leads first.
WARNING: Lithium Polymer (Li-Po) batteries come partially charged and are significantly more volatile than the alkaline, Ni-Cd or NiMH batteries used in RC applications. Keep batteries out of reach of children, unless supervised by a responsible adult. All interactions and warnings found on the sheet inside of this cad must be followed exactly. Mishandling of Li-Po batteries can result in a fire.
Before handling and first use, visually and physically inspect the battery pack, wire leads, and connectors to ensure there are no loose connections which may cause short circuit and eventual fire.
By handling, charging or using this Li-Po battery you assume all risks associated with Li-Po batteries.
|Battery Type||LiPo (3.7V per cell)|
|Wire Gauge||10 AWG|
|Charge Protection Circuitry||No|